MWANDS.COM, LLC 1600 Watt 7 Blade Missouri Freedom 3 Sealed Wind Turbine (Black)
- Fully sealed to create a water-resistant motor for wind and hydropower. Perfect for marine environments but can be used anywhere a wind turbine can be mounted.
- Water-resistant design… No marine varnish or painting required! Fully sealed 1600 watt Freedom 3PMG with labyrinth style sealed front bearing and gasket style seal to keep water from seeping into the case.
- PMG also features 17mm shaft, custom hub spacer/stabilizer with keyway, and zinc-plated 14 rare earth neodymium magnet rotor.
- PMG mounting braket and stars & stripes turbine tail are hot-dipped galvanized for a weather-resistant finish. Tail is cut from 16 gauge steel for added durability!
- Turbine Kit Includes: Freedom III Fully Sealed PMG, PMG mounting bracket, turbine tail, spacer/stabilizer, rectifier, and seven G4 blades.
Freedom 3 Sealed PMG – For Land or Sea
The Missouri Wind and Solar Freedom 3 PMG is fully sealed to create a water-resistant motor for wind and hydropower. Truly well thought out with years of R&D behind the production. The fully sealed motor is perfect for marine environments but can be used anywhere a wind turbine can be mounted.
Wind Turbine Features:
♦ Fully Sealed 1600 Watt Freedom 3 PMG with 3 phase bridge rectifier
♦ Heavy duty hub spacer/stabilizer with slot to fit keyway
♦ PMG mounting bracket and heavy-duty Stars & Stripes wind turbine tail
– Mounting Bracket fits on 1.5″ schedule #40 or #80 pipe (1 7/8″ OD) and allows for easy turning
– Tail fin measures 9 3/4 inches wide x 28 3/4 inches tall (Cut from 16 gauge steel) – Hot dipped galvanized weather resistant finish
♦ Includes 7 Generation 4 aerodynamically tapered carbon fiber composite blades
Fully Sealed Freedom 3 PMG Features:
♦ Larger bearings to withstand wear and abuse
♦ Sealed front bearing with additional labyrinth style seal
♦ Case with a rough, natural finish means more surface area to speed
♦ Keyed shaft and hub stabilizer
♦ Hub stabilizer that channels water away from entering through the front of the housing
♦ Gasket style RTV seal to keep water from seeping into the case
♦ Water resistant design – no marine varnish or painting required
♦ Wind tunnel testing up to 55 MPH
Freedom PMG Features:
♦ 17 mm stainless steel shaft
♦ Custom hub spacer/stabilizer with keyway and bolts for securely attaching to Missouri Wind & Solar hubs
♦ Double Nickel and Zinc plated powerful 14 rare earth neodymium magnet rotor
♦ No brushes to fail or replace
♦ Large, heavy-duty bearings in front and back
♦ Fits Delco bolt patterns and mounts up to our standard mounting bracket
♦ 3/8″ Diameter bolt holes
♦ 1-15/16″ on center between mounting holes
♦ 5-7/8″ OD Width
♦ 6-5/16″ Tall
MWANDS.COM 1600 Watt 5 Blade Missouri Freedom 3 Sealed Wind Turbine (Black)
- Fully sealed to create a water-resistant motor for wind and hydropower. Perfect for marine environments but can be used anywhere a wind turbine can be mounted.
- Water-resistant design… No marine varnish or painting required! Fully sealed 1600 watt Freedom 3PMG with labyrinth style sealed front bearing and gasket style seal to keep water from seeping into the case.
- PMG also features 17mm shaft, custom hub spacer/stabilizer with keyway, and zinc-plated 14 rare earth neodymium magnet rotor.
- PMG mounting braket and stars & stripes turbine tail are hot-dipped galvanized for a weather-resistant finish. Tail is cut from 16 gauge steel for added durability!
- Turbine Kit Includes: Freedom III Fully Sealed PMG, PMG mounting bracket, turbine tail, spacer/stabilizer, rectifier, and five G4 blades.
Freedom 3 Sealed PMG – For Land or Sea
The Missouri Wind and Solar Freedom 3 PMG is fully sealed to create a water-resistant motor for wind and hydropower. Truly well thought out with years of R&D behind the production. The fully sealed motor is perfect for marine environments but can be used anywhere a wind turbine can be mounted. Wind Turbine Features:
♦ Fully Sealed 1600 Watt Freedom 3 PMG with 3 phase bridge rectifier ♦ Heavy duty hub spacer/stabilizer with slot to fit keyway ♦ PMG mounting bracket and heavy-duty Stars & Stripes wind turbine tail – Mounting Bracket fits on 1.5″ schedule #40 or #80 pipe (1 7/8″ OD) and allows for easy turning – Tail fin measures 9 3/4 inches wide x 28 3/4 inches tall (Cut from 16 gauge steel) – Hot dipped galvanized weather resistant finish ♦ Includes 5 Generation 4 aerodynamically tapered carbon fiber composite blades Fully Sealed Freedom 3 PMG Features:
♦ Larger bearing to withstand wear and abuse ♦ Sealed front bearing with additional labyrinth style seal ♦ Case with a rough, natural finish means more surface area to speed ♦ Keyed shaft and hub stabilizer ♦ Hub stabilizer that channels water away from entering through the front of the housing ♦ Gasket style seal to keep water from seeping into the case ♦ Water resistant design – no marine varnish or painting required ♦ Wind tunnel testing up to 55 MPH Freedom PMG Features:
♦ 17 mm stainless steel shaft ♦ Custom hub spacer/stabilizer with keyway and bolts ♦ Zinc plated 14 rare earth neodymium magnet rotor ♦ No brushes to fail or replace ♦ Large, heavy-duty bearings in front and back ♦ Fits Delco bolt patterns and mounts up to our standard mounting bracket ♦ 3/8″ Diameter bolt holes ♦ 1-15/16″ on center between mounting holes ♦ 5-7/8″ OD Width ♦ 6-5/16″ Tall
MWANDS.COM, LLC 1600 Watt Missouri Falcon 62 Inch Freedom 3 Sealed Wind Turbine (5 Blade)
- Fully sealed to create a water-resistant motor for wind and hydropower. Perfect for marine environments but can be used anywhere a wind turbine can be mounted.
- Water-resistant design… No marine varnish or painting required! Fully sealed 1600 watt Freedom 3PMG with labyrinth style sealed front bearing and gasket style seal to keep water from seeping into the case.
- PMG also features 17mm shaft, custom hub spacer/stabilizer with keyway, and zinc-plated 14 rare earth neodymium magnet rotor.
- PMG mounting braket and stars & stripes turbine tail are hot-dipped galvanized for a weather-resistant finish. Tail is cut from 16 gauge steel for added durability!
- Turbine Kit Includes: Freedom III Fully Sealed PMG, PMG mounting bracket, turbine tail, spacer/stabilizer, rectifier, and Falcon blades.
Freedom 3 Sealed PMG – For Land or Sea
The Missouri Wind and Solar Freedom 3 PMG is fully sealed to create a water-resistant motor for wind and hydropower. Truly well thought out with years of R&D behind the production. The fully sealed motor is perfect for marine environments but can be used anywhere a wind turbine can be mounted.
Wind Turbine Features:
♦ Fully Sealed 1600 Watt Freedom 3 PMG with 3 phase bridge rectifier
♦ Heavy duty hub spacer/stabilizer with slot to fit keyway
♦ PMG mounting bracket and heavy-duty Stars & Stripes wind turbine tail
– Mounting Bracket fits on 1.5″ schedule #40 or #80 pipe (1 7/8″ OD) and allows for easy turning
– Tail fin measures 9 3/4 inches wide x 28 3/4 inches tall (Cut from 16 gauge steel) – Hot dipped galvanized weather resistant finish
♦ Includes Missouri Falcon 62 inch diameter aircraft aluminum blades (each blade is 29.5 inches long)
Fully Sealed Freedom 3 PMG Features:
♦ Larger bearings to withstand wear and abuse
♦ Sealed front bearing with additional labyrinth style seal
♦ Case with a rough, natural finish means more surface area to speed
♦ Keyed shaft and hub stabilizer
♦ Hub stabilizer that channels water away from entering through the front of the housing
♦ Gasket style RTV seal to keep water from seeping into the case
♦ Water resistant design – no marine varnish or painting required
♦ Wind tunnel testing up to 55 MPH
Freedom PMG Features:
♦ 17 mm stainless steel shaft
♦ Custom hub spacer/stabilizer with keyway and bolts
♦ Double Nickel and Zinc plated powerful 14 rare earth neodymium magnet rotor
♦ No brushes to fail or replace
♦ Large, heavy-duty bearings in front and back
♦ Fits Delco bolt patterns and mounts up to our standard mounting bracket
♦ 3/8″ Diameter bolt holes
♦ 1-15/16″ on center between mounting holes
♦ 5-7/8″ OD Width
♦ 6-5/16″ Tall
MWANDS.COM, LLC 1600 Watt Missouri Raptor G5 70 Inch Blade Freedom 3 Sealed Wind Turbine (3 Blades)
- Fully sealed to create a water-resistant motor for wind and hydropower. Perfect for marine environments but can be used anywhere a wind turbine can be mounted.
- Water-resistant design… No marine varnish or painting required! Fully sealed 1600 watt Freedom 3PMG with labyrinth style sealed front bearing and gasket style seal to keep water from seeping into the case.
- PMG also features 17mm shaft, custom hub spacer/stabilizer with keyway, and zinc-plated 14 rare earth neodymium magnet rotor.
- PMG mounting braket and stars & stripes turbine tail are hot-dipped galvanized for a weather-resistant finish. Tail is cut from 16 gauge steel for added durability!
- Turbine Kit Includes: Freedom III Fully Sealed PMG, PMG mounting bracket, turbine tail, spacer/stabilizer, rectifier, and G5 blades.
Freedom 3 Sealed PMG – For Land or Sea
The Missouri Wind and Solar Freedom 3 PMG is fully sealed to create a water-resistant motor for wind and hydropower. Truly well thought out with years of R&D behind the production. The fully sealed motor is perfect for marine environments but can be used anywhere a wind turbine can be mounted.
Wind Turbine Features:
♦ Fully Sealed 1600 Watt Freedom 3 PMG with 3 phase bridge rectifier
♦ Heavy duty hub spacer/stabilizer with slot to fit keyway
♦ PMG mounting bracket and heavy-duty Stars & Stripes wind turbine tail
– Mounting Bracket fits on 1.5″ schedule #40 or #80 pipe (1 7/8″ OD) and allows for easy turning
– Tail fin measures 9 3/4 inches wide x 28 3/4 inches tall (Cut from 16 gauge steel) – Hot dipped galvanized weather resistant finish
♦ Includes Raptor G5, 33 inch aerodynamically tapered blades
Fully Sealed Freedom 3 PMG Features:
♦ Larger bearings to withstand wear and abuse
♦ Sealed front bearing with additional labyrinth style seal
♦ Case with a rough, natural finish means more surface area to speed
♦ Keyed shaft and hub stabilizer
♦ Hub stabilizer that channels water away from entering through the front of the housing
♦ Gasket style RTV seal to keep water from seeping into the case
♦ Water resistant design – no marine varnish or painting required
♦ Wind tunnel testing up to 55 MPH
Freedom PMG Features:
♦ 17 mm stainless steel shaft
♦ Custom hub spacer/stabilizer with keyway and bolts for securely attaching to Missouri Wind & Solar hubs
♦ Double Nickel and Zinc plated powerful 14 rare earth neodymium magnet rotor
♦ No brushes to fail or replace
♦ Large, heavy-duty bearings in front and back
♦ Fits Delco bolt patterns and mounts up to our standard mounting bracket
♦ 3/8″ Diameter bolt holes
♦ 1-15/16″ on center between mounting holes
♦ 5-7/8″ OD Width
♦ 6-5/16″ Tall