Docooler LCD Economic PWM Wind Solar Hybrid System Controller 12v/24v Automatic Identification Battery Controller (600w Wind + 400w Solar)
- Intelligent design succinct structure, control powerful, stable performance, safety and reliability of the products.
- Boost charging function to solve the low charging efficiency due to the low wind speed(need to customize).
- Use PWM step less unloading way.LCD display battery voltage and power.
- Professional digital intelligent control.
- Perfect protection. CE testing approval.
Specifications:
Color: Black
Material: Aluminium Alloy
System Rated Voltage: 12V / 24V (Automatic Identification）
Photovoltaic(PV) Modules Power：400W (Max.)
Wind Power Generator Power: 600W
Charging Current: 37.5A
Filling protection: 28.8V±1%
Float Filling: 27.6V±1%
Filling Recovery: 26.4V±1%
Temperature Compensation: -48mV/℃
Over Discharge Disconnect (dc): 21.8V±1%
Over Discharge Recovery (dc): 24.6V±1%
Over-voltage Cut off (dc): 32.0V±1%
Over-voltage Recovery (dc): 30.0V±1%
Unload Current (dc): ≤0.1A
Voltage Drop (dc): ≤0.5V
Control Mode: PWM
Display: LCD
Protection Type: Lightning Protection, Solar Reverse Charge Protection, Battery Open-circuit Protection, Battery Reverse Protection, Over Wind Speed and Over-voltage Soft Automatic Brake Protection, Overload Protection etc.
Heat-dissipating Method: Radiator
Environment Temperature: -25℃ ～ +55℃ (-13℉ ～ 131℉)
Using Altitude: ≤5500 m (It need to reduce power above 2000m.)
Environment Humidity: 0～90%, No Condensation
Item Size: Approx. 165 * 140 * 64mm / 6.5 * 5.5 * 2.5in (L * W * H)
Item Weight: Approx. 1112.7g / 39.2oz
Package Size: Approx. 18.5 * 17 * 9cm / 7.3 * 6.7 * 3.5in (L * W * H)
Package Weight: Approx. 1209g / 42.7oz
Package List:
1 * Wind/Solar Hybrid System Controller
1 * User Manual
Missouri Wind and Solar Dual Freedom II Hybrid Wind & Solar Digital All in One Charge Controller (12V)
This Double Digital All in One Charge Controller is ideal for quickly connecting two single wind turbines or one dual core wind turbine (such as our Freedom II Series). Create the most power output by using this double charge controller with a hybrid system. You can easily connect solar panels to the board, no additional controller needed.Designed, assembled and quality checked in Missouri USA using global parts.
Comes pre-wired for plug and play with:
-1200 watt divert load
-dual 3-phase brake switch (perfect for the Freedom II Wind Turbine)
-two 90 amp rectifiers for 3-phase output wind turbine connection
-charge controller with LED volt meter
-mechanical relay with arc suppressor
-and 5 foot long heavy duty battery cables
12 Volt Digital 440 Amp Charge Controller with Divert Relay & LED Meter for Wind and Solar
- Dual microprocessor controlled for stability and accuracy
- On board relay isolates electronics from back voltage spikes from large 440 amp relay. This is important to get the longest life out of the electronics
- Multiple user changeable settings and trip points for many various system requirements and applications.
- Plug & Play: Long leads for easy termination to your 12 volt battery or battery bank
- Isolated Electronics Protection – Almost impossible to accidentally connect wind or solar directly to the circuit board
The 440 amp charge controller with divert relay can be used with our divert loads (divert load sold separately). Some diversion loads include, wirewound resistor style, DC water heating elements, our room heaters, or simple plug in grid feed inverters.
Comes with User Manual and Wiring Diagrams
High amp rating – 440 amps
Battery Status Digital LED display- Lets you know your battery’s actual voltage!
Green LED on board lets you know it’s in dump mode
Plug & Play – Long leads for easy termination to your 12 volt battery or battery bank
Can divert the charging source from the batteries to the load, or dump both the batteries along with the charging source
You can connect both wind and solar at the same time
Reverse polarity protection Ultra low power consumption even with the volt meter on (almost negligible).
You can even set the volt meter to turn off after in-activity
On board relay- Isolates electronics from back voltage spikes. This is important to get the longest life out of the electronics
Custom built relay with REAL plated anti seizing contacts – This is no ordinary relay solenoid.
The basic operating philosophy of a diversion controller is quite simple. Monitor the battery voltage, and if it should rise to a predetermined level, connect a diversion load, of sufficient size, to the battery or energy source to prevent the battery voltage from increasing any further. This is a very simple, yet very effective way of preventing battery overcharging. All alternate energy systems should have some form of battery overcharge protection.