2000 Watt 11 Blade Missouri General Freedom II Wind Turbine
- Metal components are fully hot dipped galvanized, hub is zinc plated – Will not rust – No need for painting or special coating for up to 50 years under normal conditions
- Raptor carbon fiber blades withstand 125 mph – Guaranteed for a lifetime, not to break under normal use.
- The permanent magnet generator has a 28 rare earth magnet rotor inside and our skewed stator core for easy turning – up to 2000 watts max output!
- The Missouri Freedom II Wind Turbines have a cut-in wind speed of 6 MPH and NO COGGING!
- Each Freedom PMG rotor contains twice as much copper than any Delco style PMA – more copper means more power!
This unit comes with:
Freedom ll PMG (PERMANENT MAGNET GENERATOR) WITH 28 MAGNET ROTOR
Freedom ll PMG has no brushes, very dependable
125,000 hours + of rated bearing life
Two heavy duty bridge rectifiers for converting 3 phase to dc output
Mounting Bracket and Heavy Duty 2 arms tail assembly
Tail fin measures 29″ tall for maximum tracking
No slip rings to fail or replace. Wire tension system
Comes with 11 Raptor nylon carbon fiber composite blades
Aerodynamically tapered Genuine RAPTOR GENERATION 4 Blades for maximum output
Blades Make 62 1/2″ dia. swept area
Steel blade hub is 1/4” thick x 9” in diameter
Mounting Bracket Fits on 1.5″ schedule #40 or #80 pipe
Heavy duty Hub spacer/stabilizer
3 YEAR Limited WARRANTY
Turbine Weight: 50 pounds
Shipping Weight: 55 pounds
Shipping Dimensions: 30″ x 10″ x 8″
Manufactured in the USA
PMG Features:
NO COGGING – CUT-IN SPEED IS 6 MPH
17 mm Stainless steel shaft compatible with all Missouri Wind and Solar hubs
Polished aluminum case
Zinc plated 28 magnet rotor and skewed stator core
For charging 12, 24, or 48 volt battery banks
Specifically designed for wind turbine
AZN.M1.0
Missouri Wind and Solar 1600 Watt 5 Blade Missouri Freedom Wind Turbine (24V, Black)
- 5 High Quality Raptor Generation 4 Blades – Self Regulating Blades
- 1600 Watt, High Amp Freedom Permanent Magnet Generator (PMG) with skewed stator core for no-cogging!
- A Missouri Wind and Solar Freedom PMG has more copper for more power! Our Freedom PMG contains twice as much copper than any Delco style PMA
- Also comes with: Stars & Stripes tail, steel hub, rectifier, heavy duty hub spacer/stabilizer, stainless steel nuts and bolts for assembly.
It has a 14 magnet rotor inside and our skewed stator core for easy turning – up to 1600 watts max output! NO COGGING – Cut in speed of 6 MPH
This unit comes with:
Freedom PMG (PERMANENT MAGNET GENERATOR) WITH 14 MAGNET ROTOR.
Freedom PMG has no brushes, very dependable!
125,000 hours + of rated bearing life.
One heavy duty bridge rectifier for converting 3 phase to DC output.
Fully galvanized mounting Bracket and Heavy Duty two arm tail assembly.
Tail fin measures 29″ tall for maximum tracking.
No slip rings to fail or replace. Wire tension system.
Comes with 5 Raptor Generation 4 nylon carbon fiber composite blades.
Aerodynamically tapered Genuine RAPTOR GENERATION 4 Blades for maximum output.
Blades Make 62 1/2″ dia. swept area
Steel blade hub is 1/4” thick x 9” in diameter
Mounting Bracket Fits on 1.5″ schedule #40 or #80 pipe.
Heavy duty Hub spacer/stabilizer
Turbine Weight: 38.4 pounds
Shipping Weight: 40 pounds
Shipping Dimensions: 30″ x 10″ x 8″
Our Freedom PMG permanent magnet generator is specifically designed for wind turbine use and can even be used with vertical axis wind turbines.
PMG Features:
17 mm Stainless steel shaft compatible with all Missouri Wind and Solar hubs
Polished aluminum case
Zinc plated 14 magnet rotor and skewed stator core
Fits delco bolt patterns and mounts up to our standard mounting bracket.
PMG Specifications:
3/8″ Diameter bolt holes
1 15/16″ on center between mounting holes 5 7/8″ OD Width 6 5/16″ Tall (Can be used as 3 phase output or DC output / Grid tie or battery charging
AZN.M1.0
MWANDS.COM, LLC 1600 Watt 7 Blade Missouri Freedom 3 Sealed Wind Turbine (Black)
- Fully sealed to create a water-resistant motor for wind and hydropower. Perfect for marine environments but can be used anywhere a wind turbine can be mounted.
- Water-resistant design… No marine varnish or painting required! Fully sealed 1600 watt Freedom 3PMG with labyrinth style sealed front bearing and gasket style seal to keep water from seeping into the case.
- PMG also features 17mm shaft, custom hub spacer/stabilizer with keyway, and zinc-plated 14 rare earth neodymium magnet rotor.
- PMG mounting braket and stars & stripes turbine tail are hot-dipped galvanized for a weather-resistant finish. Tail is cut from 16 gauge steel for added durability!
- Turbine Kit Includes: Freedom III Fully Sealed PMG, PMG mounting bracket, turbine tail, spacer/stabilizer, rectifier, and seven G4 blades.
Freedom 3 Sealed PMG – For Land or Sea
The Missouri Wind and Solar Freedom 3 PMG is fully sealed to create a water-resistant motor for wind and hydropower. Truly well thought out with years of R&D behind the production. The fully sealed motor is perfect for marine environments but can be used anywhere a wind turbine can be mounted.
Wind Turbine Features:
♦ Fully Sealed 1600 Watt Freedom 3 PMG with 3 phase bridge rectifier
♦ Heavy duty hub spacer/stabilizer with slot to fit keyway
♦ PMG mounting bracket and heavy-duty Stars & Stripes wind turbine tail
– Mounting Bracket fits on 1.5″ schedule #40 or #80 pipe (1 7/8″ OD) and allows for easy turning
– Tail fin measures 9 3/4 inches wide x 28 3/4 inches tall (Cut from 16 gauge steel) – Hot dipped galvanized weather resistant finish
♦ Includes 7 Generation 4 aerodynamically tapered carbon fiber composite blades
Fully Sealed Freedom 3 PMG Features:
♦ Larger bearings to withstand wear and abuse
♦ Sealed front bearing with additional labyrinth style seal
♦ Case with a rough, natural finish means more surface area to speed
♦ Keyed shaft and hub stabilizer
♦ Hub stabilizer that channels water away from entering through the front of the housing
♦ Gasket style RTV seal to keep water from seeping into the case
♦ Water resistant design – no marine varnish or painting required
♦ Wind tunnel testing up to 55 MPH
Freedom PMG Features:
♦ 17 mm stainless steel shaft
♦ Custom hub spacer/stabilizer with keyway and bolts for securely attaching to Missouri Wind & Solar hubs
♦ Double Nickel and Zinc plated powerful 14 rare earth neodymium magnet rotor
♦ No brushes to fail or replace
♦ Large, heavy-duty bearings in front and back
♦ Fits Delco bolt patterns and mounts up to our standard mounting bracket
♦ 3/8″ Diameter bolt holes
♦ 1-15/16″ on center between mounting holes
♦ 5-7/8″ OD Width
♦ 6-5/16″ Tall
AZN.M1.0
Missouri Wind and Solar 1600 Watt 7 Blade Missouri Freedom Wind Turbine (24V, Gray)
- 7 High Quality Raptor Series or Raptor Generation 4 Blades – Self Regulating Blades
- 1600 Watt, High Amp Freedom Permanent Magnet Generator (PMG) with skewed stator core for no-cogging!
- A Missouri Wind and Solar Freedom PMG has more copper for more power! Our Freedom PMG contains twice as much copper than any Delco style PMA
- Hot dipped galvanized finish and fully zinc plated steel hub require zero painting for up to 50 years under normal conditions!
- Also comes with: Hot dipped galvanized Stars & Stripes tail, zinc plated steel hub, rectifier, heavy duty hub spacer/stabilizer, stainless steel nuts and bolts for assembly.
It has a 14 magnet rotor inside and our skewed stator core for easy turning – up to 1600 watts max output! NO COGGING – Cut in speed of just 6 MPH
This unit comes with:
Brushless Freedom PMG (PERMANENT MAGNET GENERATOR) WITH 14 MAGNET ROTOR.
125,000 hours + of rated bearing life.
One heavy duty bridge rectifier for converting 3 phase to DC output.
Hot dipped galvanized mounting bracket and Stars & Stripes wind turbine tail.
Hot dipped galvanized tail fin is cut from 16 gauge steel is 9 3/4 inches wide x 28 3/4 inches high
Two 28 1/2 inch long tail arms
No slip rings to fail or replace. Wire tension system.
Comes with Raptor Series black or Raptor Generation 4 carbon fiber composite blades.
Blades make 62 1/2″ dia. swept area
Zinc coated steel blade hub is 1/4” thick x 9” in diameter
Hot dipped galvanized mounting bracket fits on 1.5″ schedule #40 or #80 pipe.
Heavy duty hub spacer/stabilizer
Our Freedom PMG permanent magnet generator is specifically designed for wind turbine use and can even be used with vertical axis wind turbines.
PMG Features:
17 mm Stainless steel shaft compatible with all Missouri Wind and Solar hubs
Polished aluminum case
Zinc plated 14 magnet rotor and skewed stator core
Fits delco bolt patterns and mounts up to our standard mounting bracket.
PMG Specifications:
3/8″ Diameter bolt holes
1 15/16″ on center between mounting holes
5 7/8″ OD Width
6 5/16″ Tall
Shipping Weight: 45 pounds
Shipping Dimensions: 30″ x 10″ x 8″
AZN.M1.0
MWANDS.COM, LLC 1600 Watt 9 Blade Missouri Freedom 3 Sealed Wind Turbine (Black)
- Fully sealed to create a water-resistant motor for wind and hydropower. Perfect for marine environments but can be used anywhere a wind turbine can be mounted.
- Water-resistant design… No marine varnish or painting required! Fully sealed 1600 watt Freedom 3PMG with labyrinth style sealed front bearing and gasket style seal to keep water from seeping into the case.
- PMG also features 17mm shaft, custom hub spacer/stabilizer with keyway, and zinc-plated 14 rare earth neodymium magnet rotor.
- PMG mounting braket and stars & stripes turbine tail are hot-dipped galvanized for a weather-resistant finish. Tail is cut from 16 gauge steel for added durability!
- Turbine Kit Includes: Freedom III Fully Sealed PMG, PMG mounting bracket, turbine tail, spacer/stabilizer, rectifier, and nine G4 blades.
Freedom 3 Sealed PMG – For Land or Sea
The Missouri Wind and Solar Freedom 3 PMG is fully sealed to create a water-resistant motor for wind and hydropower. Truly well thought out with years of R&D behind the production. The fully sealed motor is perfect for marine environments but can be used anywhere a wind turbine can be mounted.
Wind Turbine Features:
♦ Fully Sealed 1600 Watt Freedom 3 PMG with 3 phase bridge rectifier
♦ Heavy duty hub spacer/stabilizer with slot to fit keyway
♦ PMG mounting bracket and heavy-duty Stars & Stripes wind turbine tail
– Mounting Bracket fits on 1.5″ schedule #40 or #80 pipe (1 7/8″ OD) and allows for easy turning
– Tail fin measures 9 3/4 inches wide x 28 3/4 inches tall (Cut from 16 gauge steel) – Hot dipped galvanized weather resistant finish
♦ Includes 9 Generation 4 aerodynamically tapered carbon fiber composite blades
Fully Sealed Freedom 3 PMG Features:
♦ Larger bearings to withstand wear and abuse
♦ Sealed front bearing with additional labyrinth style seal
♦ Case with a rough, natural finish means more surface area to speed
♦ Keyed shaft and hub stabilizer
♦ Hub stabilizer that channels water away from entering through the front of the housing
♦ Gasket style RTV seal to keep water from seeping into the case
♦ Water resistant design – no marine varnish or painting required
♦ Wind tunnel testing up to 55 MPH
Freedom PMG Features:
♦ 17 mm stainless steel shaft
♦ Custom hub spacer/stabilizer with keyway and bolts for securely mounting to Missouri Wind and Solar hubs
♦ Double Nickel and Zinc plated powerful14 rare earth neodymium magnet rotor
♦ No brushes to fail or replace
♦ Large, heavy-duty bearings in front and back
♦ Fits Delco bolt patterns and mounts up to our standard mounting bracket
♦ 3/8″ Diameter bolt holes
♦ 1-15/16″ on center between mounting holes
♦ 5-7/8″ OD Width
♦ 6-5/16″ Tal
AZN.M1.0
Missouri Wind and Solar Freedom PMG 24 Volt Permanent Magnet Wind Turbine Generator from
- NO COGGING, easy to turn – Cut in speed of 6 MPH
- Skewed stator core with high grade electrical steel and heavy duty copper windings
- 17 mm stainless steel shaft compatible with all Missouri Wind and Solar hubs
- 2x thick polished aluminum case
- Fits delco bolt patterns and mounts up to our standard mounting bracket
Missouri Wind and Solar FREEDOM PMG (permanent magnet generator)
Our newest innovation in power generation!
Operating Information:
Produces battery voltage at approximately 266 RPM
Produces twice (2X) the battery voltage at approximately 506 RPM
Produces four times (4X) the battery voltage at approximately 960 RPM
Why buy a Freedom or Freedom II PMG over a Delco car alternator PMA?
The answer is simply more copper! More copper equals more power – each Freedom PMG stator contains twice as much copper than any Delco style PMA.
Additional reasons why the Freedom PMG is better than ANY Delco or other modified car alternator PMA:
Some modified alternators use power to make power. Freedom PMGs use no input power. PMAs use a thin aluminum housing and the stator is not pressed in. The Freedom PMG features a very thick aluminum housing and a pressed in stator that helps with proper alignment and durability.
PMAs have only two mounting holes. The Freedom PMG has four of them bolted tightly against the mounting bracket for secure mounting.
Alternators and some PMAs have a weak rear bearing. The Freedom PMG utilizes two heavy duty bearings.
Most car alternators and PMAs that are re-purposed use low grade/high iron electrical steel which can create a lot of heat. The Freedom PMG uses high grade electrical steel and is optimized for efficient cooling
PMG Specifications:
3/8″ Diameter bolt holes 1 15/16″ on center between mounting holes
5 7/8″ OD Width
6 5/16″ Tall
AZN.M1.0
Missouri Wind and Solar 2000 Watt 9 Blade Missouri General Freedom II Wind Turbine (12V, Black)
- Metal components are fully hot dipped galvanized, hub is zinc plated – Will not rust – No need for painting or special coating for up to 50 years under normal conditions
- Raptor carbon fiber blades withstand 125 mph – Guaranteed for a lifetime, not to break under normal use.
- The permanent magnet generator has a 28 rare earth magnet rotor inside and our skewed stator core for easy turning – up to 2000 watts max output!
- The Missouri Freedom II Wind Turbines have a cut-in wind speed of 6 MPH and NO COGGING!
- Each Freedom PMG rotor contains twice as much copper than any Delco style PMA – more copper means more power!
This unit comes with:
Freedom ll PMG (PERMANENT MAGNET GENERATOR) WITH 28 MAGNET ROTOR
Freedom ll PMG has no brushes, very dependable
125,000 hours + of rated bearing life
Two heavy duty bridge rectifiers for converting 3 phase to dc output
Mounting Bracket and Heavy Duty 2 arms tail assembly
Tail fin measures 29″ tall for maximum tracking
No slip rings to fail or replace. Wire tension system
Comes with 9 Raptor Generation 4 nylon carbon fiber composite blades
Aerodynamically tapered Genuine RAPTOR GENERATION 4 Blades for maximum output
Blades Make 62 1/2″ dia. swept area
Steel blade hub is 1/4” thick x 9” in diameter
Mounting Bracket Fits on 1.5″ schedule #40 or #80 pipe
Heavy duty Hub spacer/stabilizer
3 YEAR Limited WARRANTY
Turbine Weight: 50 pounds
Shipping Weight: 55 pounds
Shipping Dimensions: 30″ x 10″ x 8″
Manufactured in the USA
PMG Features:
NO COGGING – CUT-IN SPEED IS 6 MPH
17 mm Stainless steel shaft compatible with all Missouri Wind and Solar hubs
Polished aluminum case
Zinc plated 28 magnet rotor and skewed stator core
For charging 12, 24, or 48 volt battery banks
Specifically designed for wind turbines
AZN.M1.0
Missouri Wind and Solar Freedom II PMG 12/24 Volt Permanent Magnet Wind Turbine Generator
- NO COGGING, easy to turn – Cut in speed of 6 MPH
- Skewed stator core with high grade electrical steel and heavy duty copper windings
- 17 mm stainless steel shaft compatible with all Missouri Wind and Solar hubs
- 2x thick polished aluminum case
- Fits delco bolt patterns and mounts up to our standard mounting bracket
If you are using the PMG on a 12 volt system choose the 12/24v model. For 24 volt systems use 24/48v model. For 48 volt systems use the 48/96v model.
Our Freedom II PMG permanent magnet generator is specifically designed for wind turbine use and can even be used with vertical axis wind turbines (VAWT).
Operating Information:
Produces battery voltage at approximately 266 RPM in parallel; 133 RPM in series
Produces twice (2x) the battery voltage at approximately 506 RPM in parallel; 253 RPM in series
Produces four times (4x) the battery voltage at approximately 960 RPM in parallel; 480 RPM in series
This permanent magnet generator works best with our 9 Blade Raptor Generation 4 blades and hub or our new Falcon Mach 4 80″ 3 blade set.
Why buy a Freedom or Freedom II PMG over a Delco car alternator PMA? The answer is more copper. Copper equals more power – each Freedom PMG stator contains twice as much copper than a Delco style PMA. Some modified alternators use power to make power. Freedom PMGs use no input power. PMAs use a thin aluminum housing and the stator is not pressed in.
The Freedom PMG features a very thick aluminum housing and a pressed in stator that helps with proper alignment and durability. PMAs have only two mounting holes. The Freedom PMG has four of them bolted tightly against the mounting bracket for secure mounting. Alternators and some PMAs have a weak rear bearing. The Freedom PMG utilizes two heavy duty bearings. Most car alternators and PMAs that are re-purposed use low grade/high iron electrical steel which can create a lot of heat. The Freedom PMG uses high grade electrical steel and is optimized for efficient cooling
PMG Features: Comes with two heavy duty rectifiers & one hub spacer stabilizer
Zinc plated 28 rare earth neodymium magnet rotor
For charging 12, 24, or 48V battery banks
AZN.M1.0
Missouri Wind and Solar Dual Freedom II Hybrid Wind & Solar Digital All in One Charge Controller (12V)
This Double Digital All in One Charge Controller is ideal for quickly connecting two single wind turbines or one dual core wind turbine (such as our Freedom II Series). Create the most power output by using this double charge controller with a hybrid system. You can easily connect solar panels to the board, no additional controller needed.Designed, assembled and quality checked in Missouri USA using global parts.
Comes pre-wired for plug and play with:
-1200 watt divert load
-dual 3-phase brake switch (perfect for the Freedom II Wind Turbine)
-two 90 amp rectifiers for 3-phase output wind turbine connection
-charge controller with LED volt meter
-mechanical relay with arc suppressor
-and 5 foot long heavy duty battery cables